Products and Services

GO to Chinese
Screened:
Filter criteria:

Open gear operating lubricant ET G-OG C-1000

U.LUBE ET G-OG C-1000 is a new generation of lead-free, chlorine-free, asphalt-free and solvent-free environmentally friendly heavy-duty gear grease thickened by new compound soap-based thickener with high viscosity base oil and refined with high-performance extreme pressure anti-wear, anti-corrosion and anti-rust additives. It has good adhesion performance, extreme pressure anti-wear performance, impact load resistance, and has the necessary performance to adapt to the operating conditions and environmental needs, such as high temperature resistance, water erosion resistance, strong sealing, reduce the impact of dust, good spraying performance, good pumping performance.

NLGI
00/000
Application introduction
Recommended for open gears of large equipment in cement, mining, steel, electric power, chemical and paper industries, such as: rotary kilns, ball mills, tube mills, rod mills, dryers, granulators, drum pulverizers, etc. Suitable for automatic injection lubrication system.

Open gear operating lubricant ET G-OG C-Fluid

U.LUBE ET G-OG C-Fluid is a new generation of lead-free, chlorine-free, asphalt-free and solvent-free environmentally friendly heavy-duty gear grease thickened by new compound soap-based thickener with high viscosity base oil and refined with high-performance extreme pressure anti-wear, anti-corrosion and anti-rust additives. It has good adhesion performance, extreme pressure anti-wear performance, impact load resistance, and has the necessary performance to adapt to the operating conditions and environmental needs, such as high temperature resistance, water erosion resistance, strong sealing, reduce the impact of dust, good spraying performance, good pumping performance.

NLGI
00/000
Application introduction
Recommended for open gears of large equipment in cement, mining, steel, electric power, chemical and paper industries, such as: rotary kilns, ball mills, tube mills, rod mills, dryers, granulators, drum pulverizers, etc. Suitable for automatic injection lubrication system.

Open gear operating lubricant ET G-OG C-16M

U.LUBE C-16M is a new generation of lead-free, chlorine-free, asphalt-free and solvent-free environmentally friendly heavy-duty gear grease thickened by new compound soap-based thickener with high viscosity base oil and refined with high-performance extreme pressure anti-wear, anti-corrosion and anti-rust additives. It has good adhesion performance, extreme pressure anti-wear performance, impact load resistance, and has the necessary performance to adapt to the operating conditions and environmental needs, such as high temperature resistance, water erosion resistance, strong sealing, reduce the impact of dust, good spraying performance, good pumping performance.

NLGI
00/000
Application introduction
Recommended for open gears of large equipment in cement, mining, steel, electric power, chemical and paper industries, such as: rotary kilns, ball mills, tube mills, rod mills, dryers, granulators, drum pulverizers, etc. Suitable for automatic injection lubrication system.

Heavy Duty High Performance Grease ET RP 1500

U.LUBE ET RP 1500 is a high performance heavy-duty grease, especially suitable for high load and high temperature operation of machinery and equipment. It has good water resistance and is resistant to shock loads. It has good lubricating properties, minimizing wear and extending the service life of the equipment. The product is also very suitable for low speed, shock and vibration load equipment lubrication.

NLGI
2
Application introduction
It is recommended for lubricating the bearings of large equipment in cement, mining, steel, electric power, chemical and paper industries, such as: dryers, granulators, excavators, roller presses, crushers, etc.

Heavy Duty High Performance Grease ET RP 1000

U.LUBE ET RP 1000 is a high performance heavy-duty grease, especially suitable for high load and high temperature operation of machinery and equipment. It has good water resistance and is resistant to shock loads. It has good lubricating properties, minimizing wear and extending the service life of the equipment. It is also very suitable for low speed, shock and vibration load lubrication.

NLGI
2
Application introduction
It is recommended for lubricating the bearings of large equipment in cement, mining, steel, electric power, chemical and paper industries, such as: dryers, granulators, excavators, roller presses, crushers, etc.

High-temperature lubricant ET RCP 320

U.LUBE ET RCP 320 is a synthetic lubricant rich in graphite solid lubricant with good high temperature lubrication performance up to 600°C. It provides fluid lubrication up to 200°C and mixed lubrication between 200 and 300°C. Above 300°C it provides excellent solid lubrication. It provides fluid lubrication up to 200°C and mixed lubrication between 200 and 300°C. Above 300°C it provides excellent solid lubrication.

Viscosity
320
Application introduction
It is suitable for lubrication of any equipment under high temperature working conditions, such as industrial transmission chains, low speed rolling bearings, chains, bushings, etc. Also suitable for lubrication between rotary kiln, wheel belt and pad.

Open Gear Operating Lubricant ET O-OG C-F8

U.LUBE ET O-OG C-F8 is a new high performance heavy duty large open gear lubricant formulated with a high viscosity synthetic base oil and new additives. It can be used at temperatures up to 120°C. The high viscosity base oil ensures the stability of the oil film on the tooth surface during meshing and guarantees the good running condition of the gearing mechanism at a very low dosage. The product has good adhesion performance and excellent anti-wear and anti-pressure performance, especially suitable for high load and impact open gear transmission mechanism. The product does not contain asphalt, solvents, heavy metals.

Viscosity
9500
Application introduction
ET O-OG C-F8 is suitable for spray lubrication, circulation lubrication or impregnation. It is recommended for heavy-duty open gears in industries such as cement, mining, chemical industry and power plants, as well as in the sugar and paper industries and in ship or offshore oil field operations.

Open Gear Operating Lubricant ET O-OG C-F16

U.LUBE ET O-OG C-F16 is a new high performance heavy duty large open gear lubricant formulated with a high viscosity synthetic base oil and new additives. It can be used at temperatures up to 120°C. The high viscosity base oil ensures the stability of the oil film on the tooth surface during meshing and guarantees the good running condition of the gearing mechanism at a very low dosage. The product has good adhesion performance and excellent anti-wear and anti-pressure performance, especially suitable for high load and impact open gear transmission mechanism. The product does not contain asphalt, solvents, heavy metals.

Viscosity
16600
Application introduction
It is suitable for spray lubrication, circulating lubrication or dipping. It is recommended for heavy-duty open gears in industries such as cement, mining, chemical industry and power plants, as well as in the sugar and paper industries and in ship or offshore oil field operations.

Open Gear Operating Lubricant ET O-OG 1500

U.LUBE ET O-OG 1500 is designed for lubricating medium to large open gears with good adhesion, extreme pressure and excellent anti-wear properties, and consists of synthetic base oils for use at temperatures from -10 to 80°C. It is free of bitumen, solvents and heavy metals, and is very environmentally friendly. The product is free of bitumen, solvents and heavy metals, making it very environmentally friendly.

Viscosity
1500
Application introduction
It is recommended for low speed and heavy load open gears in cement, mining, chemical, power generation, sugar, paper and ship industries. The product is suitable for a variety of lubrication methods such as dipping, circulating or spraying. Please consult U.LUBE's technical service staff for specific applications.

Open Gear Wear Lubricant ET G-OG B-HR

U.LUBE ET G-OG B-HR is free of bitumen and heavy metals, and its special additives produce the necessary physicochemical reactions in the metal wear area. Under high temperature and pressure, it causes slight mechanical abrasion, surface micro-flow and chemical reaction of material consumption, thus achieving a more effective contact pattern of the tooth surface.

NLGI
000
Application introduction
For the correction of tooth profiles in open gears, including the improvement of tooth contact in new gears or the elimination of gluing and high point contact in old gears.