U.LUBE® industrial special lubricants

U.LUBE's Blog

Home
Blog

2023-03-11

Coal chemical mill open gear lubrication improved, tooth surface temperature decreased

优润

There are four Φ4.0x6.0m mills produced by Jiangyin Neutral Machinery in the gasification plant of a coal chemical plant. The open gears are lubricated by spray system. After an on-site inspection by the U.LUBE team, it was found that the mill tooth surfaces had different degrees of damage and the lubrication effect was poor, which would affect the production of the whole enterprise in a serious situation if not solved in time.

2023-03-09

Cement rotary kiln wheel belt lubrication improvement solution, reduce grease consumption and ensure stable operation of equipment

优润

The U.LUBE team found that the temperature of the cylinder near the second gear wheel belt of rotary kiln is about 340℃, which requires high requirements for the lubricating oil of rotary kiln wheel belt and needs to have good high temperature resistance.

2023-03-01

U.LUBE team on-site service, roller press / high-pressure roller mill equipment inspection, installation of automatic lubrication system, the use of U.LUBE roller press special grease

The U.LUBE team has over 30 years of professional lubrication experience and expertise, and the ability to design efficient lubrication solutions.

2023-02-24

Mine ball replaced with new mill gear pair, change the lubricant from fluid grease to new pure oil, improve the site environment

优润(U.LUBE)

After replacing the pure oil, U.LUBE service team technicians regularly made continuous follow-up observation on the effect of using the No.1 mill open gear lubricant.

2023-02-13

Solve the high temperature alarm problem of roller press in cement plant, U.LUBE roller press grease ensure the production operation

优润U.LUBE

Previously, the roller press had frequent high temperature alarms, and the U.LUBE team went to the site to investigate and found that the main reason was that the lubricant used could not meet the lubrication requirements of the roller press for the roller bearings, which led to slight wear of the bearings and increased temperature and thus the alarm.

2023-02-09

U.LUBE continuous caster bearing grease withstands long-term high temperature test to ensure normal production of steel plant

优润U.LUBE

In order to ensure the normal operation of the steel mill, the continuous casting machine has a high demand for lubrication and needs special lubricants to meet the lubrication of the continuous casting machine under the long-term high temperature, water vapor and dust conditions. Last year, U.LUBE service team cooperated with a domestic steel mill.